Main properties
- ATLAS GEOFLEX EXPRESS is manufactured as a dry mixture of the highest quality cement binder, aggregates and specially selected modifying agents: natural and synthetic
- fast-performance - the use of fast-performance cement in the adhesive makes it possible to achieve very fast increases in adhesion and strength, especially in the initial period (first 2-3 hours after bonding the tiles. This allows tile penetration and grouting as early as 2 hours after tile adhesion - the adhesive is also recommended for quick repairs of ceramic cladding (e.g. on balconies, terraces, etc.).
- wide range of adhesive layer thicknesses (2-15 mm) allows:
- thin-layer bonding of cladding on an even substrate,
- thin-layer adhesion of coverings on uneven substrates, preceded by levelling mudding,
- thick-layer coverings on uneven substrates without the need for levelling mudding.
- no flowing down of the facing - allows the facing to be glued "from above" without the need to support it during installation
- notile settling during setting - so you can continue interrupted cladding work without fear of lowering the level of the tiles to be glued (after they have set)
- insensitive to changeable weather conditions - allows fast and safe execution of cladding works in various weather conditions; quick achievement of performance parameters by the adhesive limits the possibility of damage to cladding carried out outside the building, during the installation stage
Main parameters
- durability (working time)
- approx. 45 minutes (mixing ratio 0.24 l/kg)
- approx. 75 minutes (mixing ratio 0.3 l/kg)
- open time: min. 20 minutes
- correctability: 10 minutes
- setting on tiles: after approx. 2 hours
- grouting: after approx. 2 hours
- pedestrian traffic load: after 2-6 hours
- full service load - traffic: after approx. 24 hours
- activation of underfloor heating: after 7 days
