- Repairing building substrates indoors and outdoors - allows filling of cavities, depressions and levelling of other substrate irregularities.
- Production of subfloors bonded to the substrate.
- Type of substrate to be repaired - cement and cement-lime plaster, concrete, aerated concrete, cement screeds, as well as unplastered brick and ceramic or silicate hollow brick walls.
- Type of finishing layer - ceramic tile cladding, plaster, thin-bed plaster, floor panels, etc.
ATLAS ZW 330 levelling mortar 25 kg
| Brand: | Atlas |
| Product code: | 000921 |
| In stock: | 53 pcs |
Quick-performance levelling mortar
Key features
- bonding of tiles after only 5 hours
- no shrinkage cracking (fibre-reinforced)
- high mechanical strength
- under tiles, slabs, plaster, floor bases
Product description
| Brand: | Atlas |
| Product code: | 000921 |
| Availability: | Immediately |
| Weight | 0 |
Main properties
- allows a very quick start to subsequent work - under standard conditions, the tiles can be glued in place after approx. 5 hours (at a layer thickness of 5 mm)
- reduces consumption of adhesive and plaster mortars as well as flooring and subfloors
- plastic consistency - working parameters ensure easy application and the desired filling of cavities in the surface to be repaired
- reinforced with polypropylene fibres which:
- reduce cracks resulting from shrinkage during mortar setting,
- allows thicker mortar layers to be applied on vertical surfaces without run-off effect,
- ensures uniform water transport during drying
- wide range of layer thicknesses from 3 to 30 mm in one operation - in addition, when mixed with quartz sand (grain size up to 2 mm) in a 1:4 ratio by weight (sand : dry mortar), layer thicknesses from 31 mm to 60 mm can be extended (when filling cavities and levelling horizontal surfaces)
Main parameters
- mortar thickness: 3-30 mm
- compressive strength: min. 20.0 MPa
Consumption
On average, approximately 15 kg of dry mix is used per 1m2, for every 10 mm of thickness.
