- ATLAS MURARSKA APPARATEL is recommended for traditional, thick joint masonry - it allows for correcting dimensional inaccuracies of wall elements.
- It allows the erection of overground storeys, basement walls and foundations - in reinforced and non-reinforced elements subject to structural requirements.
- It connects the elements into a stable and durable wall - it is a soft and resilient matrix in which rigid elements such as bricks, stones and blocks are embedded.
- Protects individual masonry components - bricks, blocks, hollow blocks - from deterioration - provides a buffer limiting the effect of load stresses under the influence of successive layers of masonry and heat and moisture changes in the surroundings.
- Type of masonry - bricks, blocks and other such ceramic, lime sand and concrete materials
ATLAS Masonry mortar 25 kg
| Brand: | Atlas |
| Product code: | 000919 |
| In stock: | 81 pcs |
Traditional mortar
Key features
- for ceramic, concrete and silicate elements
- for thick joints 6-40 mm
- compressive strength min. 5.0 N/mm2
- high ductility
Product description
| Brand: | Atlas |
| Product code: | 000919 |
| Availability: | Immediately |
| Weight | 0 |
Main properties
- ATLAS MURRAY FILL is produced as a dry mixture of the highest quality cement binder, quartz fillers and improvers
- compressive strength - category M5
- prepared in the factory - guarantees uniform mortar working properties and technical parameters of joints after setting
- easy and convenient to use - has very good workability, plasticity and high adhesion
- has an extended working time - about 4 hours
- anti-freezing agents can be added to the mortar, allowing work to be carried out at lower temperatures, i.e. below +5 °C - a new temperature range below +5 °C - a new range of temperatures for mortar application, mortar preparation (especially the correction of the amount of water added), principles of works and mortar setting conditions should be adopted according to the additive manufacturer's indications; the amount of the anti-freezing agent added depends on the cement content in the mortar - the ratio of cement: fillers in ATLAS ZAPRAWA MURSKA is 1:3. Note. The mortar manufacturer is not responsible for the effects and quality of the antifreeze additives used.
Main parameters
- layer thickness: 6 - 40 mm
- strength - min. 5.0 N/mm2
