The machine allows the mixing of gypsum mortars (plasters, smoothings) as well as cement mortars, self-levelling screeds, tile adhesives.
- the low rotational speed in 1st gear is adapted to aerated binders (which dry on contact with the air) - this extends the time of open work on the wall, as it is possible to apply the mixed but not aerated mortar and to work with a trowel for longer than with a normal mixer (to smooth out unevenness gradually)
- the mixer has the capacity to mix up to 140 litres of mortar in one cycle, thanks to its high torque, powerful motor and large mixer diameter (140 mm).This is a key feature when working with the currently fashionable high-speed anhydrite or cementitious screeding compounds, as you can pour a bathroom floor, for example, in one cycle without the risk of the primer poured in several layers separating from the screed.
Speed control
The spindle speed must be set using the regulator. The regulator knob has numbers on it, the higher the number shown on the knob the higher the spindle speed. The speed is adjusted in a stepless manner. The speed adjustment and the ability to change the agitator ensures that the working characteristics can be easily adapted to the mass being mixed.
Additional information:
The convenient position of the handles is designed to make the operator's work easier, as it does not result in the need to bend over in a forced position when mixing mortar.
- the standard M14 thread means that once the mixer is worn out, it can be easily replaced with a new one
- the machine housing is designed to increase resistance to the splashing and dusting that is characteristic of working with dry mixtures spread with water
Parameters:
- rated voltage [V~]: 220 - 240
- Rated frequency [Hz]: 50/60
- rated power [W]: 1600
- insulation class: II
- rated rpm [min-1]: 1: 180 - 480 / 2: 300 - 750
- Mounting of agitator: M14
- max. agitator diameter [mm]: 160
- degree of protection: IP20
- weight [kg]: 6.5
