- ATLAS M-System 3G plastic connectors are used for enclosures and housings on:
- walls
- ceilings,
- attics,
- floors (with service loads up to max. 4 kN/m2). - ATLAS M-system 3G disc connectors are intended for indoor installation of:
- gypsum plasterboard wall and ceiling coverings - according to EN 520-A1:2012, 12.5-25.0 mm thick (for internal applications only),
- wall and floor fibre-cement boards - category A, B, C or D according to PN-EN 12467:2013, with a thickness of 8.0-25.0 mm,
- wall and ceiling wood-based panels - according to PN-EN 13986-A1:2015 standard, with a thickness of 12.0-25.0 mm,
- floor wood-based panels - according to PN-EN 13986-A1:2015 standard, with a thickness of 22.0-25.0 mm. - The system is dedicated to both newly finished rooms and renovation work - especially when adapting lofts and attics for use or adapting used rooms for other purposes.
- It is ideal for the construction of ventilation and installation duct casings, suspended ceilings with different levels, shaped at a slant, etc.
Atlas M-system L 50 BX
| Brand: | Atlas |
| Product code: | 000905 |
| In stock: | 9 pcs |
Fasteners for fixing panels to walls, ceilings, attics and floors
Key features
- Quick fastening system for plasterboard and OSB
- stepless adjustment of the distance from as little as 1 cm and the angle of the casing
- allows for easy levelling of curves and unevenness of substrates
- for installation of flat ceilings with a wide range of spacing, multi-level
- for the installation of raised floors on sleepers, joists and ceiling joists
- recommended for the development of shafts, attics, etc.
- allows for the simultaneous installation of thermal insulation, soundproofing and vapour barriers
Product description
| Brand: | Atlas |
| Product code: | 000905 |
| Availability: | Immediately |
| Weight | 0 |
Key features
- easy to install - point fixings allow work to be carried out (installation of plate connectors and cladding panels) by one person
- Very rapid work progress - mounting of the full-size panel is limited to two steps: the drilling of several holes into which the connectors must be fitted and the fastening of the panel to the plates using steel screws.
- smooth adjustment of the distance between the panel and the substrate and the angle of inclination of the sheathing panels (±27°) - the distance of the panels from the substrate can be freely adjusted, irrespective of the geometry of the walls or plastering, within the range of 14-200 mm, and after the application of extension elements in the case of ceilings, even up to over 500 mm. Allows the installation of tile cladding at an angle (max. ±27°) to the
- The substrate (both mineral and wooden) for ATLAS M-system 3G fixing should be stable and load-bearing. No preparatory work is required: levelling, chipping cracked plastering, priming, etc. - the system allows panels to be accurately installed on very uneven or cracked plastering, in areas with wall faults, etc.
- the connectors can be used as a supplementary elementwhen bonding plasterboards to very uneven substrates (>20 mm). They can then be fixed locally in the most uneven areas without the need for any tapered seams.
- thepossibility of a collision-free arrangement of electrical, water and sewage installations as well as ventilation ducts under the surface of plasterboard lining - in the case of existing piping or wiring, they provide the possibility of a quick assembly of plasterboards while maintaining the required stability of fixing
- the possibility of combining ATLAS M-system 3G with:
- traditional technologies such as gypsum plaster ceilings,
- elements of ceilings of two or more levels, assembled on the basis of 120 PP, 120 ZN or 120 N connectors,
- tiles mounted on grid systems
- compensation of stress - thanks to point fixing of individual boards; after plastering the boards form a rigid disc which eliminates the occurrence of further stress between them and prevents the formation of cracks at the joints; the disc is decoupled from adjacent wall and ceiling claddings, being free to deform
- Quick installation of plasterboard cladding elements - lowered ceilings on part of their surface, cladding elements on room walls, etc. They can be quickly installed on designated areas of walls and ceilings adjacent to previously finished plasterboard surfaces, complementing the interior finish
- rapid installation of floor coverings on existing floors without the need for demolition work and without theneed for wet phases and process interruptions - no additional load on the ceiling structure
- the distance between the sheathing and the sub-floor can be reduced to 1 cm - minimising the loss of volume of the room
- convenience and safety in transport and storage, limitation of vertical transport of materials - small overall dimensions of the system elements allow for their transport by cars, which is not possible in the case of frame solutions; the elements do not block the storage space in rooms, they can be stored in a limited area outside or in the car
